My SOTA Loadout options: (UPDATED)
During SOTA QSOs, a lot of people ask me what I am using so I thought I would describe my setup here. Take a look and comment on your SOTA setup.
Updated: 7/23/2020
Updated: 7/23/2020
Updated: 6/10/2021
Updated: 11/19/2024
(BTW, SOTA = "Summits On The Air") Click on images for larger.
This page is turning into a bit of my "options" for a SOTA loadout. After doing this hobby for a while, gaining experience from my own adventures and learning from others, I've amassed a bit more equipment that changes based on mission. Below you'll see that I use different radios for given mission. I've been trying to lighten my load and go QRP with the KX2 and an ultra-light antenna but there are times when I load up the heavier FT-891 and associated battery when I really want to punch some power out and see how far I can really go.
One of the things that will really help me go QRP (lower power) is CW. Sending morse code over CW allows me to potentially get a lot more contacts farther away because the narrow band provides better signal to noise ratio. As I continue to learn about gear, make new antennas, learn CW, and experiment, I expect things will change. Mission #1 is have fun, and I seem to be nailing that. Pictured above is a complete 10 watt station, radio, antenna, and keyer. All you need to add is a way to get the antenna up in the air (tree or pushup pole) (it has a built in mic).(Note: Originally published Dec 31, 2017, updated Nov. 3, 2019)
<click on images for larger>
(BTW, SOTA = "Summits On The Air") Click on images for larger.
This page is turning into a bit of my "options" for a SOTA loadout. After doing this hobby for a while, gaining experience from my own adventures and learning from others, I've amassed a bit more equipment that changes based on mission. Below you'll see that I use different radios for given mission. I've been trying to lighten my load and go QRP with the KX2 and an ultra-light antenna but there are times when I load up the heavier FT-891 and associated battery when I really want to punch some power out and see how far I can really go.
One of the things that will really help me go QRP (lower power) is CW. Sending morse code over CW allows me to potentially get a lot more contacts farther away because the narrow band provides better signal to noise ratio. As I continue to learn about gear, make new antennas, learn CW, and experiment, I expect things will change. Mission #1 is have fun, and I seem to be nailing that. Pictured above is a complete 10 watt station, radio, antenna, and keyer. All you need to add is a way to get the antenna up in the air (tree or pushup pole) (it has a built in mic).(Note: Originally published Dec 31, 2017, updated Nov. 3, 2019)
<click on images for larger>
